Sand filter pump with timer 530 W 10,980 L/h

This sand filter pump with a timer is designed to keep the pool clean and free of dirt. The sand filter can filter 10,980 liters per hour and has a durable, corrosion-proof filter tank. It is resistant to the acidic influence of chlorinated pool water. It has an integrated timer, so you can choose the desired operating time (2 h, 4 h, 6 h, 8 h, 10 h, 16 h, and 24 h). The timer has 2 modes: continuous mode and single-cycle mode. In continuous mode, the pump will run for the specified number of hours and then stop. It will repeat this program every day. In single-cycle mode, the pump will run for the chosen number of hours and then stop. The operating hours can be easily adjusted by pressing the timer button. It also has an additional pre-filter to keep dirt away from the coarse sand filter. The top flange clamp design allows 360-degree rotation for easy installation. This pool filter pump is weather-resistant and durable, thanks to the reinforced plastic housing. This set includes a repairable base for secure mounting. It is compatible with most above-ground pools with a 38 mm port. Note: It can be connected to 32 mm and 38 mm diameter hoses.

• Colour: Blue and black
• Material: Plastic
• Dimensions: 550 x 480 x 740 mm (W x D x H)
• Power supply: 220-240 V~, 50 Hz
• Power: 530 W
• Connection diameter: 38 mm
• Filter diameter: 38 cm (15'')
• Flow rate: 7.5 m³ / h (32.8 GPM)
• Maximum head: 11 m
• Maximum pump capacity: 10,980 l/h
• Maximum working pressure: 3.5 bar
• Suitable water temperature: 0-45 °C
• With a pre-filter
• Integrated timer with 2 operating modes: continuous and single-cycle
• The timer can be set for periods of 2 h, 4 h, 6 h, 8 h, 10 h, 16 h, 24 h
• Requires 19-36 kg of filter sand (not included)
• IP rating: IPX5
• 7-position valve: Filtration, rinse, recirculate, winter, backwash, closed, waste
• Suitable for hoses with a diameter of 32 mm or 38 mm
• Suitable for above-ground pools
• Assembly required: Yes